|
|
|
QSX Firewall Settings
To make meeting content accessible to web viewer participants outside of your LAN, your QSX system must have an external IP address assigned to it by a network administrator. The Meeting Web Address (External IP) displayed on the Info screen is the Meeting Web Address that web viewer participants must use if they are outside the firewall. If your QSX system displays an external IP address, you can share content with other sites that are inside and outside your firewall.
Note* This feature only enables web viewer access from outside the firewall. A QSX System cannot communicate with other QSX systems across a firewall.
To assign an external IP address to the QSX system:
- Ask your network administrator to assign both a static IP address and corresponding external IP address to it, and to allow only port 80 traffic.
- Log on to the QSX Admin Web interface.
- Go to Admin Settings > LAN Properties and select Enter IP address manually.
- Enter the static IP address as Use the Following IP Address.
- Go to Admin Settings > Video Network > IP Network > Firewall and set NAT Configuration to Manual.
- Click Update.
- Enter the external IP address as the NAT Public (WAN) Address.
- Click Update.
After the QSX system restarts, both internal and external IP addresses appear on the Info screen.
To configure firewall settings:
- Log on to the QSX Admin Web interface.
- Go to Admin Settings > Video Network > IP Network > Firewall.
- Configure these settings:
| Setting |
Description |
| NAT Configuration |
Lets you specify whether the system should determine the NAT Public WAN Address automatically.
- If the system is not behind a NAT or is connected to the IP network through a Virtual Private Network (VPN), select Off.
- If the system is behind a NAT that does not allow HTTP traffic, select Manual. Select Manual to assign an external IP address to the QSX system. Click Update to access the NAT Public (WAN) option.
(default: Off) |
|
|
|
